Issue |
Parasite
Volume 17, Number 1, March 2010
|
|
---|---|---|
Page(s) | 67 - 70 | |
DOI | https://doi.org/10.1051/parasite/2010171067 | |
Published online | 15 March 2010 |
Note de recherche
Free-living Amoebae (FLA): morphological and molecular identification of Acanthamoeba in dental unit water
Amibes libres : identification morphologique et moléculaire d’Acanthamoeba dans l’eau des unités dentaires
1
Fungal and parasitic molecular biology laboratory, Sfax School of Medecine, Magida Boulila Street, 3029 Sfax, Tunisia
2
Regional unit of medical school and university, Sfax, Tunisia
* Correspondence: Pr Ali Ayadi. Tel./Fax: 00 216 74 24 71 30 – E-mail: ali.ayadi@rns.tn
Received:
24
April
2009
Accepted:
12
November
2009
The aim of our study was to detect free-living Amoebae (FLA) by morphological methods and to identify Acanthamoeba spp. by PCR in the dental unit water lines (DUWL). Materials and methods: it was a prospective study dealing with 196 water samples collected from DUWL (94 samples taken in the early morning before materials flush and patient consultations and 102 samples taken after consultations). At the same time, 39 samples from tap water were realized. Results: 135 (69 %) samples were positives by the morphological study with morphotypical diversity. The predominant morphotype was the monopodial (39.2 %). 18 strains of Acanthamoeba spp. were detected in DUW (13.3 %) and three strains in tap water (10 %). The amplification of 18S rDNA gene of these strains of Acanthamoeba spp. was positive for all samples. Conclusion: the FLA and Acanthamoeba were isolated both in tap water and in dental unit. The amoeba pathogenicity has not been demonstrated after oral or dental contamination; but the presence of intracellular and pathogenic bacteria in the amoeba could be a source of microbiological risks for patients in case of deep dental care or immunodepression. The improvement of this dental unit was necessary by putting a filter of 0.2 microns porosity before the arrival of the water in hand-pieces allowing the limitation of FLA passage.
Résumé
L’objectif de notre étude a été de détecter les amibes libres par des méthodes morphologiques et d’identifier Acanthamoeba spp. par PCR dans l’eau des unités dentaires. Matériel et méthodes : il s’agit d’une étude prospective portant sur 196 prélèvements d’eau à partir des circuits dentaires (94 échantillons réalisés avant purge et consultation des malades et 102 échantillons après consultation des malades) et 39 échantillons d’eau de robinet. Résultats : l’étude morphologique a permis de détecter les amibes libres dans 69 % des échantillons. Le morphotype prédominant était le monopodial (39,2 %). 18 souches d’Acanthamoeba ont été détectées dans l’eau du circuit dentaire (13,3 %) et trois souches dans l’eau de robinet (10 %). L’amplification du gène 18S de l’ADN ribosomal de ces souches d’Acanthamoeba spp. a été positive dans 100 % des cas. Conclusion : les amibes libres, dont Acanthamoeba, ont été isolées aussi bien dans l’eau de robinet que dans les unités dentaires. Des cas d’infections amibiennes directement attribuables aux soins dentaires n’ont pas été démontrés, cependant, la présence de bactéries intracellulaires au sein des amibes libres doit être considérée comme un risque potentiel surtout chez les patients immunodéprimés. L’assainissement de ces unités s’impose au moins par la mise en place d’un filtre de porosité 0,2 microns avant l’étape d’entrée de l’eau dans les circuits dentaires afin de limiter l’éventuel passage des amibes libres.
Key words: Acanthamoeba spp. / amibe libre / unite dentaire / identification morphologique / PCR / Tunisie
Mots clés : Acanthamoeba spp. / amibe libre / unite dentaire / identification morphologique / PCR / Tunisie
© PRINCEPS Editions, Paris, 2010, transferred to Société Française de Parasitologie
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.